ZOOP VYPER
#
 

Setup NITROX Mode

 
 
#

1 Press and hold the MODE button for 2 seconds to enter dive mode.

 
#

2 Press the MODE button to access the mode options.

 
#

3 Press the PLAN button to change the mode to SET.

 
#

4 Press the MODE button to select this option.

 
#

5 Press the TIME button to scroll through the setting options.

 
#

6 This option is for changing the dive model (air or nitrox). Press the MODE button to select this option.

 
#

7 Press the TIME button to switch the model to nitrox.

 
#

8 Press the MODE button to select nitrox as the model.

 
#

9 Now you need to set the oxygen percentage. Press the PLAN button repeatedly to increase the O2 to 32%. The max operating depth (top left) changes according to the gas percentage.

 
#

9 Press the PLAN button repeatedly to increase the O2 to 32%.

 
#

9 Press the PLAN button repeatedly to increase the O2 to 32%.

 
#

9 Press the PLAN button repeatedly to increase the O2 to 32%.

 
#

9 Press the PLAN button repeatedly to increase the O2 to 32%.

 
#

9 Press the PLAN button repeatedly to increase the O2 to 32%.

 
#

9 Press the PLAN button repeatedly to increase the O2 to 32%.

 
#

9 Press the PLAN button repeatedly to increase the O2 to 32%.

 
#

9 Press the PLAN button repeatedly to increase the O2 to 32%.

 
#

9 Press the PLAN button repeatedly to increase the O2 to 32%.

 
#

9 Press the PLAN button repeatedly to increase the O2 to 32%.

 
#

10 Press the MODE button to lock in this percentage.

 
#

11 The PO2 readout is now flashing, showing that the partial pressure is set at 1.4. If you need to change this use the PLAN/TIME buttons. Otherwise, press MODE to exit settings.

 
#

12 Press the MODE button again to quit the menu.

 
#

13 Press the MODE button again to quit the menu and return to nitrox diving mode.

 
#

Task Complete

Back to Menu
Note: Your selection of air or nitrox here will be memorised for subsequent dives.
 
 
☰